icon search
icon search
close

GRADE

M70

Description

SCGC™ LLDPE M70 series is color compound linear-low density polyethylene (LLDPE) for rotational moulding applications. With a high melt flow and a balance of impact strength, stiffness, and processability, this grade is suitable for rotational moulding of lawn and garden articles, decorative items, and small industrial parts.

Properties Test Methods Value Unit
Density ASTM D 1505 0.932 g/cm³
Melt Flow Rate at 190 °C and 2.16 kg ASTM D 1238 6.00 g/10 min
Melting Point ASTM D 2117 125 °C
UV level ASTM G155 8
DOWNLOADS
Safety Data Sheet

RELATED PRODUCT GRADES

M30
SCGC™ LLDPE M30 series are color compound linear-low density polyethylene (LLDPE) for rotational moulding applications. These grades are suitable for containers and general applications which have wall thickness less than 5 mm. M30 Series designed for indoor and semi-indoor products with UV2.
M3204RU
SCGC™ M3204RU is a linear-low density polyethylene (LLDPE) for indoor/ semi-indoor rotational moulding applications. M3204RU is a natural color PE resin available in a pellet and powder form. This grade is suitable for containers and general purpose applications which are indoor/ semi-indoor or for thin wall parts. (Wall thickness less than 5 mm)
M40
SCGC™ LLDPE M40 are color compound linear-low density polyethylene (LLDPE) for rotational molding applications. These grades are suitable for containers and general applications which have wall thickness less than 5 mm. M40 has UV8 protection for outdoor application.
M72
SCGC™ LLDPE M72 is a color compound linear-low density polyethylene (LLDPE) for rotational moulding applications. With a high melt flow and a balance of impact strength and processability, this grade is specifically designed for rotational moulding of cooler boxes, exhibiting an excellent surface finish with no pinholing.
S15
SCGC™ LLDPE S15 is a special linear-low density polyethylene (LLDPE) designed for strong adhesion to polyurethane foam (PU foam). S15 helps eliminate internal surface modification step since PU foam can be applied directly right after molding and reduce reject rates due to improper internal surface modification, in addition to reducing additional raw material procurement and increasing safety in the work station. It is suitable for temperature insulated applications.
3982P
Icorene® 3982 is bonding high density polyethylene powder to increase adhesion between Polyethylene (PE) and Polyurethane (PU) foam by mechanical means. By enhancing contact surface. The product is specifically designed for rotomolded PE cooler box with PU foam insulation or multi-layer part consisting of PE/PU Product.

SCGC Solutions

Cooler boxes
dot footer
SCG Chemicals
Public Company Limited
1 Siam Cement Road, Bangsue,
Bangkok 10800 Thailand
+662-586-1111
Contact Us Subscribe
Follow us :

Copyright © SCG Chemicals Public Company Limited (2022). All Rights Reserved.