- About SCGC
- Products and Solutions
- Investor Relations
- Sustainability
- Advancing Community
- Media
SCGC™ PP P722JO is polypropylene impact copolymer which contains UV stabilizer. This resin is recommended for producing battery case from injection molding process.
| Properties | Test Methods | Value |
|---|---|---|
| Melt Flow Rate at 230 °C and 2.16 kg (g/10 min) | ASTM D 1238 | 10.00 |
| Tensile Strength at Yield (kg/cm²) | ASTM D 638 @ Crosshead speed 50 mm/min | 300 |
| Flexural Modulus (kg/cm²) | ASTM D 790 | 13,000 |
| Izod Impact Strength at 23°C (J/m) | ASTM D 256 | 98 |
| Izod Impact Strength at 0 °C (J/m) | ASTM D 256 | 59 |
| Izod Impact Strength at -20 °C (J/m) | ASTM D 256 | 49 |
