EL-Wax™ PE Wax is polyethylene homopolymer wax, an excellent and consistent ingredient for end formulations to improve product physical appearance and thermal properties for a broad range of industries, including hot melt adhesives, PVC, color masterbatches, rubber and thermoplastics road markings, etc.
LP Series of EL-Wax™ is derived from SCG Chemicals unique HDPE production process with high technology of close loop refinery. Our products are produced in controlled narrow range to ensure consistency product quality. LP series also play an important role in adjusting the melting point, flowability and hardness, improving the physical and lubricity properties of end formulation.
Related Finished Products
Hot melt adhesive, Color Masterbatch, PVC stabilizer, PVC compounder and PVC convertor, CaCO3 Masterbach, Hot melt road marking, crayon, cable filling and rubber processing
Properties
Test Methods
Value
Density (g/cm3)
ASTM D 1505
0.94
Dropping Point (°C)
ASTM D3954
116
Melt Index at 190 °C and 2.16 kg
(g/10 min)
ASTM D1238
Penetration index (d.mm)
ASTM D1321
<=2
Softening Point (°C)
ASTM D3954
Viscosity at 149 °C
ASTM D3236
10-20
LP1024P
0.95
-
10-20
Description
LP Series of EL-Wax™ is derived from SCG Chemicals unique HDPE production process with high technology of close loop refinery. Our products are produced in controlled narrow range to ensure consistency product quality. LP series also play an important role in adjusting the melting point, flowability and hardness, improving the physical and lubricity properties of end formulation.
Related Finished Products
Hot melt adhesive, Color Masterbatch, PVC stabilizer, PVC compounder and PVC convertor, CaCO3 Masterbach, Hot melt road marking, crayon, cable filling and rubber processing
Properties
Test Methods
Value
Density (g/cm3)
ASTM D 1505
0.95
Dropping Point (°C)
ASTM D3954
118
Penetration index (d.mm)
ASTM D1321
<=2
Viscosity at 149 °C
ASTM D3236
10-20
LP1040P
0.94
20-40
Description
LP Series of EL-Wax™ is derived from SCG Chemicals unique HDPE production process with high technology of close loop refinery. Our products are produced in controlled narrow range to ensure consistency product quality. LP series also play an important role in adjusting the melting point, flowability and hardness, improving the physical and lubricity properties of end formulation.
Related Finished Products
Hot melt adhesive, Color Masterbatch, PVC stabilizer, PVC compounder and PVC convertor, CaCO3 Masterbach, Hot melt road marking, crayon, cable filling and rubber processing
Properties
Test Methods
Value
Density (g/cm3)
ASTM D 1505
0.94
Dropping Point (°C)
ASTM D3954
116
Melt Index at 190 °C and 2.16 kg
(g/10 min)
ASTM D1238
Penetration index (d.mm)
ASTM D1321
<=2
Softening Point (°C)
ASTM D3954
Viscosity at 149 °C
ASTM D3236
20-40
LP1040T
0.94
15-40
Description
Active Flow™ LP1040T has a low viscosity, better heat stability and come out as pastile form, so it can be mixed with PE and PP resins as a processing aid easily. Active flow will help improve the output of the productions and reduce production waste which occur during the production.
Related Finished Products
Food packaging, food container, electrical appliance, agricultural film and plastic pallet
Properties
Test Methods
Value
Density (g/cm3)
ASTM D 1505
0.94
Dropping Point (°C)
ASTM D3954
116
Melt Index at 190 °C and 2.16 kg
(g/10 min)
ASTM D1238
Penetration index (d.mm)
ASTM D1321
<=2
Softening Point (°C)
ASTM D3954
Viscosity at 149 °C
ASTM D3236
15-40
LP1060P
0.94
40-60
Description
LP Series of EL-Wax™ is derived from SCG Chemicals unique HDPE production process with high technology of close loop refinery. Our products are produced in controlled narrow range to ensure consistency product quality. LP series also play an important role in adjusting the melting point, flowability and hardness, improving the physical and lubricity properties of end formulation.
Related Finished Products
Hot melt adhesive, Color Masterbatch, PVC stabilizer, PVC compounder and PVC convertor, CaCO3 Masterbach, Hot melt road marking, crayon, cable filling and rubber processing
Properties
Test Methods
Value
Density (g/cm3)
ASTM D 1505
0.94
Dropping Point (°C)
ASTM D3954
116
Melt Index at 190 °C and 2.16 kg
(g/10 min)
ASTM D1238
Penetration index (d.mm)
ASTM D1321
<=2
Softening Point (°C)
ASTM D3954
Viscosity at 149 °C
ASTM D3236
40-60
LP1100P
0.94
60-100
Description
LP Series of EL-Wax™ is derived from SCG Chemicals unique HDPE production process with high technology of close loop refinery. Our products are produced in controlled narrow range to ensure consistency product quality. LP series also play an important role in adjusting the melting point, flowability and hardness, improving the physical and lubricity properties of end formulation.
Related Finished Products
Hot melt adhesive, Color Masterbatch, PVC stabilizer, PVC compounder and PVC convertor, CaCO3 Masterbach, Hot melt road marking, crayon, cable filling and rubber processing
Properties
Test Methods
Value
Density (g/cm3)
ASTM D 1505
0.94
Dropping Point (°C)
ASTM D3954
116
Melt Index at 190 °C and 2.16 kg
(g/10 min)
ASTM D1238
Penetration index (d.mm)
ASTM D1321
<=2
Softening Point (°C)
ASTM D3954
Viscosity at 149 °C
ASTM D3236
60-100
PA17L
0.98
-
-
Description
Active Plus™ PA17L is designed to be used with polyolefins product. The fluorinated polymer masterbatch will help avoid the generation of gel, die line and melt fracture problem, resulting in improving the smoothness of the film's surface.
Related Finished Products
Film packaging
Properties
Test Methods
Value
Density (g/cm3)
ASTM D 1505
0.98
Melt Index at 190 °C and 2.16 kg
(g/10 min)
ASTM D1238
2
SB31L
0.98
-
-
Description
Active Plus™ SB31L (Slip & Anti-block masterbatch) is specifically designed to be used with polyolefins product which reduce the film blocking problem as it enables air to pass between two layers of films and reduces the vacuum, so that difficulty in unrolling thin films or opening bag is eliminated. Consequently, a production proces does not need a conventional blowing processto seperate films, resulting in a faster production process, less defects and better looking film.
Related Finished Products
Film packaging
Properties
Test Methods
Value
Density (g/cm3)
ASTM D 1505
0.98
Melt Index at 190 °C and 2.16 kg
(g/10 min)
ASTM D1238
2
SB32L
1
-
-
Description
Active Plus™ SB32L (Slip & Anti-block masterbatch) is specifically designed to be used with polyolefins product which reduce the film blocking problem as it enables air to pass between two layers of films and reduces the vacuum, so that difficulty in unrolling thin films or opening bag is eliminated. Consequently, a production proces does not need a conventional blowing processto seperate films, resulting in a faster production process, less defects and better looking film.
Related Finished Products
Film packaging
Properties
Test Methods
Value
Density (g/cm3)
ASTM D 1505
1
Melt Index at 190 °C and 2.16 kg
(g/10 min)
ASTM D1238
2
WD2020P
0.92
107
-
Description
PE-Wax™ WD series are excellent properties polyetheylene homopolymer waxes produced by thernal cracking process. With our expertise and innovative technology design, our products are produced with consistency quality with uniform color and physical characteristics that can meet your requirments in various industries.
Related Finished Products
Color masterbatch, printing ink, PVC stabilizer, PVC compounder and PVC convertor and rubber processing
Properties
Test Methods
Value
Density (g/cm3)
ASTM D 1505
0.92
Penetration index (d.mm)
ASTM D1321
2
Softening Point (°C)
ASTM D3954
107
Viscosity at 140 °C
ASTM D3236
150-250
WD2040P
0.92
109
-
Description
PE-Wax™ WD series are excellent properties polyetheylene homopolymer waxes produced by thernal cracking process. With our expertise and innovative technology design, our products are produced with consistency quality with uniform color and physical characteristics that can meet your requirments in various industries.
Related Finished Products
Color masterbatch, printing ink, PVC stabilizer, PVC compounder and PVC convertor and rubber processing
Properties
Test Methods
Value
Density (g/cm3)
ASTM D 1505
0.92
Penetration index (d.mm)
ASTM D1321
2
Softening Point (°C)
ASTM D3954
109
Viscosity at 140 °C
ASTM D3236
350-450
WD2110P
0.92
110
-
Description
PE-Wax™ WD series are excellent properties polyetheylene homopolymer waxes produced by thernal cracking process. With our expertise and innovative technology design, our products are produced with consistency quality with uniform color and physical characteristics that can meet your requirments in various industries.
Related Finished Products
Color masterbatch, printing ink, PVC stabilizer, PVC compounder and PVC convertor and rubber processing
The biggest problem for plastic manufacturers is injection. The problem is usually that the complete form is not injected due to the lack of the stickiness of the plastic. This causes a lot of damage as the products have to be destroyed and reproduced which, as a result, wastes time and energy. SCG Chemicals have always been aware of this problem so we have been trying to find a solution to help. We call this "conjuring" and it is a key solution to increase the capability of injection work. "Active Flow" was, as a result, invented.
This product contains supplements that help PE and PP plastics to become more flowing. Only 1-3% of the amount of plastic needs to be added to the plastic for it to be efficient. It can be used with all kinds of plastic including recycled plastic. This product is also suitable for big parts of plastic with complicated structure such as palettes, car parts and electric parts. is a product that answers the demands of manufacturers employing injection work especially because it helps reduce damage arising during the production.
From the feedback provided by SCG Chemicals customers who use Active Flow™, it was found that manufacturers do not need to reproduce the products so this reduces the damage from 30% to 0%. The flowing component also means that the production time is reduced as well as the energy needed for the production as manufacturers are not required to adjust the temperature to be higher. Once products are easier and faster to produce without any damage, production also increases by 20%. Not only does this product work well with plastics, Active Flow™ also works efficiently with regrind plastic or leftover plastic, enabling it to take the form of a new plastic called "recycle plastic" which is more flowing and stickier than general plastic.
Active Flow™ is the result of the successful collaboration between SCG Chemicals and our customers over the past 5 years. We have consistently been developing the recipe from powder to sheet and finally to the capsules as they are now. Active Flow capsules are very practical as they can easily be added into the production without having to adjust the temperature. Active Flow™ also has a component that helps spread colors so the colors in the products are consistent and the surface smooth which makes the products more beautiful and in turn adds more value to the products.
In the future, SCG Chemicals will not stop developing Active Flow™ and continuing to make it a better and more efficient product that answers the demands of the manufacturers who would like to make their products slimmer. SCG Chemicals are now in the process of developing Active Flow™ to reduce cooling time so as to save even more time and energy in production, thereby increasing production. Active Flow™ does not only solve problems during production, but it also prevents further damage that might occur to the products, saves time and energy as well as increasing production for the manufacturers. In short, Active Flow™ is like a magic powder that gives more zest to the recipes and the result is a more delectable dish for consumers!
Click here for more information about Active Flow™ LP1040T
PE Wax
Total 12 grades
EL-Wax™ PE Wax is polyethylene homopolymer wax, an excellent and consistent ingredient for end formulations to improve product physical appearance and thermal properties for a broad range of industries, including hot melt adhesives, PVC, color masterbatches, rubber and thermoplastics road markings, etc.
LP Series of EL-Wax™ is derived from SCG Chemicals unique HDPE production process with high technology of close loop refinery. Our products are produced in controlled narrow range to ensure consistency product quality. LP series also play an important role in adjusting the melting point, flowability and hardness, improving the physical and lubricity properties of end formulation.
Related Finished Products
Hot melt adhesive, Color Masterbatch, PVC stabilizer, PVC compounder and PVC convertor, CaCO3 Masterbach, Hot melt road marking, crayon, cable filling and rubber processing
LP Series of EL-Wax™ is derived from SCG Chemicals unique HDPE production process with high technology of close loop refinery. Our products are produced in controlled narrow range to ensure consistency product quality. LP series also play an important role in adjusting the melting point, flowability and hardness, improving the physical and lubricity properties of end formulation.
Related Finished Products
Hot melt adhesive, Color Masterbatch, PVC stabilizer, PVC compounder and PVC convertor, CaCO3 Masterbach, Hot melt road marking, crayon, cable filling and rubber processing
LP Series of EL-Wax™ is derived from SCG Chemicals unique HDPE production process with high technology of close loop refinery. Our products are produced in controlled narrow range to ensure consistency product quality. LP series also play an important role in adjusting the melting point, flowability and hardness, improving the physical and lubricity properties of end formulation.
Related Finished Products
Hot melt adhesive, Color Masterbatch, PVC stabilizer, PVC compounder and PVC convertor, CaCO3 Masterbach, Hot melt road marking, crayon, cable filling and rubber processing
Active Flow™ LP1040T has a low viscosity, better heat stability and come out as pastile form, so it can be mixed with PE and PP resins as a processing aid easily. Active flow will help improve the output of the productions and reduce production waste which occur during the production.
Related Finished Products
Food packaging, food container, electrical appliance, agricultural film and plastic pallet
LP Series of EL-Wax™ is derived from SCG Chemicals unique HDPE production process with high technology of close loop refinery. Our products are produced in controlled narrow range to ensure consistency product quality. LP series also play an important role in adjusting the melting point, flowability and hardness, improving the physical and lubricity properties of end formulation.
Related Finished Products
Hot melt adhesive, Color Masterbatch, PVC stabilizer, PVC compounder and PVC convertor, CaCO3 Masterbach, Hot melt road marking, crayon, cable filling and rubber processing
LP Series of EL-Wax™ is derived from SCG Chemicals unique HDPE production process with high technology of close loop refinery. Our products are produced in controlled narrow range to ensure consistency product quality. LP series also play an important role in adjusting the melting point, flowability and hardness, improving the physical and lubricity properties of end formulation.
Related Finished Products
Hot melt adhesive, Color Masterbatch, PVC stabilizer, PVC compounder and PVC convertor, CaCO3 Masterbach, Hot melt road marking, crayon, cable filling and rubber processing
Active Plus™ PA17L is designed to be used with polyolefins product. The fluorinated polymer masterbatch will help avoid the generation of gel, die line and melt fracture problem, resulting in improving the smoothness of the film's surface.
Active Plus™ SB31L (Slip & Anti-block masterbatch) is specifically designed to be used with polyolefins product which reduce the film blocking problem as it enables air to pass between two layers of films and reduces the vacuum, so that difficulty in unrolling thin films or opening bag is eliminated. Consequently, a production proces does not need a conventional blowing processto seperate films, resulting in a faster production process, less defects and better looking film.
Active Plus™ SB32L (Slip & Anti-block masterbatch) is specifically designed to be used with polyolefins product which reduce the film blocking problem as it enables air to pass between two layers of films and reduces the vacuum, so that difficulty in unrolling thin films or opening bag is eliminated. Consequently, a production proces does not need a conventional blowing processto seperate films, resulting in a faster production process, less defects and better looking film.
PE-Wax™ WD series are excellent properties polyetheylene homopolymer waxes produced by thernal cracking process. With our expertise and innovative technology design, our products are produced with consistency quality with uniform color and physical characteristics that can meet your requirments in various industries.
Related Finished Products
Color masterbatch, printing ink, PVC stabilizer, PVC compounder and PVC convertor and rubber processing
PE-Wax™ WD series are excellent properties polyetheylene homopolymer waxes produced by thernal cracking process. With our expertise and innovative technology design, our products are produced with consistency quality with uniform color and physical characteristics that can meet your requirments in various industries.
Related Finished Products
Color masterbatch, printing ink, PVC stabilizer, PVC compounder and PVC convertor and rubber processing
PE-Wax™ WD series are excellent properties polyetheylene homopolymer waxes produced by thernal cracking process. With our expertise and innovative technology design, our products are produced with consistency quality with uniform color and physical characteristics that can meet your requirments in various industries.
Related Finished Products
Color masterbatch, printing ink, PVC stabilizer, PVC compounder and PVC convertor and rubber processing
The biggest problem for plastic manufacturers is injection. The problem is usually that the complete form is not injected due to the lack of the stickiness of the plastic. This causes a lot of damage as the products have to be destroyed and reproduced which, as a result, wastes time and energy. SCG Chemicals have always been aware of this problem so we have been trying to find a solution to help. We call this "conjuring" and it is a key solution to increase the capability of injection work. "Active Flow" was, as a result, invented.
This product contains supplements that help PE and PP plastics to become more flowing. Only 1-3% of the amount of plastic needs to be added to the plastic for it to be efficient. It can be used with all kinds of plastic including recycled plastic. This product is also suitable for big parts of plastic with complicated structure such as palettes, car parts and electric parts. is a product that answers the demands of manufacturers employing injection work especially because it helps reduce damage arising during the production.
From the feedback provided by SCG Chemicals customers who use Active Flow™, it was found that manufacturers do not need to reproduce the products so this reduces the damage from 30% to 0%. The flowing component also means that the production time is reduced as well as the energy needed for the production as manufacturers are not required to adjust the temperature to be higher. Once products are easier and faster to produce without any damage, production also increases by 20%. Not only does this product work well with plastics, Active Flow™ also works efficiently with regrind plastic or leftover plastic, enabling it to take the form of a new plastic called "recycle plastic" which is more flowing and stickier than general plastic.
Active Flow™ is the result of the successful collaboration between SCG Chemicals and our customers over the past 5 years. We have consistently been developing the recipe from powder to sheet and finally to the capsules as they are now. Active Flow capsules are very practical as they can easily be added into the production without having to adjust the temperature. Active Flow™ also has a component that helps spread colors so the colors in the products are consistent and the surface smooth which makes the products more beautiful and in turn adds more value to the products.
In the future, SCG Chemicals will not stop developing Active Flow™ and continuing to make it a better and more efficient product that answers the demands of the manufacturers who would like to make their products slimmer. SCG Chemicals are now in the process of developing Active Flow™ to reduce cooling time so as to save even more time and energy in production, thereby increasing production. Active Flow™ does not only solve problems during production, but it also prevents further damage that might occur to the products, saves time and energy as well as increasing production for the manufacturers. In short, Active Flow™ is like a magic powder that gives more zest to the recipes and the result is a more delectable dish for consumers!
Click here for more information about Active Flow™ LP1040T
