icon-close
icon-close
icon-search
close

M20

GRADE

M20

dot-banner
banner-curve-dbanner-curve-m
Description
Properties Test Methods Value Unit
Density ASTM D 1505 0.938 g/cm³
Melt Flow Rate at 190 °C and 2.16 kg ASTM D 1238 4.00 g/10 min
Melting Point ASTM D 2117 125 °C
UV level ASTM G155 2
DOWNLOADS
Safety Data Sheet

RELATED PRODUCT GRADES

M3504DXP
SCGC™ LLDPE M3504DXP is powder of a linear low density polyethylene octene copolymer for rotational molding applications. M3504DXP are specifically designed for applications requiring excellent environmental stress crack resistance and impact strength combined with low warpage and good processing. It is fully heat and UV stabilized resulting in a wide processing latitude, good color retention, and long life expectancy. Both of them are recommended for large and thick tanks with a generous radius and curve.
M3565RW
SCGC™ M3565RW is a linear-low density polyethylene (LLDPE) with Hexene co-monomer (C6) for rotational moulding. M3565RW is a natural color PE resin available in a pellet form. With a high UV resistance (UV8), good balancing of stiffness & impact, excellent surface finishing, good dimension tolerance and excellent ESCR, this grade suitable for rotational moulding of water tanks, chemical tanks and Automotive parts.
M3804RU
SCGC™ LLDPE M3804RU is a linear-low density polyethylene (LLDPE) for indoor / semi-indoor rotational moulding applications. M3804RU is a natural color PE resin available in a pellet and powder form. This grade is suitable for rotational moulding of storage tanks and general-purpose applications which are indoor / semi-indoor or for thin wall (less than 5 mm) parts.
M3804RW
SCGC™ LLDPE M3804RW is linear low density polyethylene (LLDPE) for rotational molding applications. M3804RW is a natural color PE resin available in a pellet and powder form. These grades are suitable for rotational molding of storage tanks and general applications.
M3845RW
SCGC™ M3845RW is a linear-low density polyethylene (LLDPE) for rotational moulding. M3845RW is a natural color PE resin available in a pellet form. With a high UV resistance (UV8), fast cooking, easy demolding, good dimension stability, this grade suitable for rotational moulding of water tanks
M3845RY
SCGC™ M3845RY is a linear-low density polyethylene (LLDPE) for rotational moulding. M3845RY is a natural color PE resin aviailable in a pellet form. With fast cooking, easy demolding, good dimension stability, this grade suitable for rotational moulding, this grade sustable for multi-purpose rotaional moulding applications
M3863RW
SCGC™ M3863RW is a linear-low density polyethylene (LLDPE) for rotational moulding with Hexene co-monomer (C6). M3863RW is a natural color PE resin aviailable in a pellet form. With an extra UV resistance (UV20), high stiffness and good impact resistance, long durability and excellent ESCR, this grade suitable for rotational moulding of large water tanks, undergroud tanks and chemical tanks
M9001RW
SCGC™ LLDPE M9001RW is a linear-low density polyethylene (LLDPE) for rotational moulding applications. M9001RW is a natural color available in a pellet and powder form. This grade is suitable for rotational moulding of large water tanks and parts that require high stiffness.
M10
SCGC™ LLDPE M10 series is color compound linear-low density polyethylene (LLDPE) for rotational moulding applications. This grade is suitable for rotational moulding of storage tanks and general purpose applications.
M50
SCGC™ LLDPE M50 series is color compound linear-low density polyethylene (LLDPE) for rotational moulding applications. M50 is specifically designed for applications requiring excellent environmental stress crack resistance and impact strength combined with low warpage and good processing. It is fully heat and UV stabilized resulting in a wide processing latitude, good color retention, and long life expectancy. Both of them are recommended for large and thick tanks with a generous radius and curve.
M90
SCGC™ LLDPE M90 series is color compound linear-low density polyethylene (LLDPE) for rotational moulding applications. M90 is available in a pellet and powder form. This grade is suitable for rotational moulding of large water tanks and parts that require high stiffness.
arrow-02-r
arrow-02-l

SCGC Solutions

Water tanks
Icon Solutions Water Tanks
arrow-02-r
arrow-02-l
dot footer
SCG Chemicals
Public Company Limited
1 Siam Cement Road, Bangsue,
Bangkok 10800 Thailand
icon-phone+662-586-1111
arrow-right-1Contact Us icon searchSubscribe
Follow us :
  • icon-fb
  • icon-tw
  • icon-yt
  • icon-in
  • icon-line

Copyright © SCG Chemicals Public Company Limited (2022). All Rights Reserved.