HDPE (1)			Density (g/cm3)	Melt Index at 190 °C and 2.16 kg (g/10 min)
	H5480S		0.952	0.8	-
			TDS	SDS	Brochure
Description EL-Lene™ H5480S is a high density polyethylene resin which provides high tenacity, good weathering, and easy processing. Related Finished Products Net & ropes, sun shading, tarpulin, and woven bag Properties Test Methods Value Density (g/cm3) ASTM D 1505 0.952 Flexural Modulus (kg/cm2) ASTM D 790 10000 IZOD 23 °C (kg.cm/cm) ASTM D 256 17 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 0.8

LLDPE (13)			Density (g/cm3)	Melt Index at 190 °C and 2.16 kg (g/10 min)
	M10		0.938	4	-
			TDS	SDS	Brochure
Description EL-Lene™ M3804RW and Marvel™ M10 are linear low density polyethylene (LLDPE) for rotational molding applications. M3804RW is a natural color PE resin available in a pellet and powder form, whereas M10 is the color compound version. These grades are suitable for rotational molding of storage tanks and general applications. Related Finished Products Water storage tanks, Small to medium tanks (<5,000 L), Material handling containers, Septic tanks Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 27 Density (g/cm3) ASTM D 1505 0.938 Flexural Modulus (Mpa) ASTM D 790 700 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 4 VICAT Softening Temperature (°C) ASTM D 1525 116
	M1A		0.938	4	-
			TDS		Brochure
Description Marvel™ M1A (Anti-microbial) is a linear-low density polyethylene (LLDPE) for rotational molding applications. M1A is a color compound containing nanosilver ions which possess anti-bacteria and anti-fungal efficacy which lasts for 5 - 10 years. Related Finished Products Inner layers of water storage tanks, Hygienic parts Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 27 Density (g/cm3) ASTM D 1505 0.938 Flexural Modulus (Mpa) ASTM D 790 700 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 4 VICAT Softening Temperature (°C) ASTM D 1525 116
	M30		0.932	4	-
			TDS	SDS	Brochure
Description Marvel™ M30, M31, and M40 are color compound linear low density polyethylene (LLDPE) for rotational molding applications. These grades are suitable for containers and general applications which have thin wall less than 5 mm. M30 and M31 are designed for indoor and semi-indoor products, whereas M40 has UV8 protection for outdoor use. Related Finished Products Fishery/cooler containers, Portable containers, Material handling containers, General purpose molding, Chemical storage tanks Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 28 Density (g/cm3) ASTM D 1505 0.932 Flexural Modulus (Mpa) ASTM D 790 570 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 4 VICAT Softening Temperature (°C) ASTM D 1525 108
	M31		0.932	4	-
			TDS	SDS	Brochure
Description Marvel™ M30, M31, and M40 are color compound linear-low density polyethylene (LLDPE) for rotational molding applications. These grades are suitable for containers and general applications which have thin wall less than 5 mm. M30 and M31 are designed for indoor and semi-indoor products, whereas M40 has UV8 protection for outdoor use. Related Finished Products Fishery/cooler containers, Portable containers, Material handling containers, General purpose molding, Chemical storage tanks Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 28 Density (g/cm3) ASTM D 1505 0.932 Flexural Modulus (Mpa) ASTM D 790 570 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 4 VICAT Softening Temperature (°C) ASTM D 1525 108
	M3204RU		0.932	4	-
			TDS	SDS	Brochure
Description EL-Lene™ M3204RU is a linear low density polyethylene (LLDPE) for indoor/ semi-indoor rotational molding applications. M3204RU is a natural color PE resin available in a pellet and powder form. This grade is suitable for containers and general applications which are indoor/ semi-indoor or for thin wall (less than 5 mm) parts. Related Finished Products Fishery/cooler containers, Portable containers, Material handling containers, General purpose molding, Chemical storage tanks Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 28 Density (g/cm3) ASTM D 1505 0.932 Flexural Modulus (Mpa) ASTM D 790 570 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 4 VICAT Softening Temperature (°C) ASTM D 1525 108
	M3204RX		0.932	4	-
			TDS	SDS	Brochure
Description EL-Lene™ M3204RX is a linear low density polyethylene (LLDPE) for indoor/ semi-indoor rotational molding applications. M3204RX is a natural color PE resin available in a pellet and powder form. With an excellent impact property, good thermal stability, and a balance of stiffness and processability, it is suitable for rotational molding of containers and general applications. Related Finished Products Water storage tanks, Portable containers, Material handling containers, Fishery/cooler containers, General purpose molding, Traffic cones/ road barriers Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 28 Density (g/cm3) ASTM D 1505 0.932 Flexural Modulus (Mpa) ASTM D 790 570 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 4 VICAT Softening Temperature (°C) ASTM D 1525 108
	M3504DXP		0.935	4	-
			TDS	SDS	Brochure
Description EL-Lene™ M3504DXP and M50 are powder and color compound of Dowlex NG2429.01G which is a linear low density polyethylene octene copolymer for rotational molding applications. M3504DXP and M50 are specifically designed for applications requiring excellent environmental stress crack resistance and impact strength combined with low warpage and good processing. It is fully heat and UV stabilized resulting in a wide processing latitude, good color retention, and long life expectancy. Both of them are recommended for large and thick tanks with a generous radius and curve. Related Finished Products Intermediate bulk containers, Drums for chemicals, Boats, Freezer containers, Large and thick tanks with a radius and curve Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 25 Density (g/cm3) ASTM D 1505 0.935 Flexural Modulus (Mpa) ASTM D 790 640 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 4 VICAT Softening Temperature (°C) ASTM D 1525 118
	M3804RW		0.938	4	-
			TDS	SDS	Brochure
Description EL-Lene™ M3804RW and Marvel™ M10 are linear low density polyethylene (LLDPE) for rotational molding applications. M3804RW is a natural color PE resin available in a pellet and powder form, whereas M10 is the color compound version. These grades are suitable for rotational molding of storage tanks and general applications. Related Finished Products Water storage tanks, Small to medium tanks (<5,000 L), Material handling containers, Septic tanks Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 27 Density (g/cm3) ASTM D 1505 0.938 Flexural Modulus (Mpa) ASTM D 790 700 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 4 VICAT Softening Temperature (°C) ASTM D 1525 116
	M40		0.932	4	-
			TDS	SDS	Brochure
Description Marvel™ M30, M31, and M40 are color compound linear-low density polyethylene (LLDPE) for rotational molding applications. These grades are suitable for containers and general applications which have thin wall less than 5 mm. M30 and M31 are designed for indoor and semi-indoor products, whereas M40 has UV8 protection for outdoor use. Related Finished Products Fishery/cooler containers, Portable containers, Material handling containers, General purpose molding, Chemical storage tanks Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 28 Density (g/cm3) ASTM D 1505 0.932 Flexural Modulus (Mpa) ASTM D 790 570 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 4 VICAT Softening Temperature (°C) ASTM D 1525 108
	M50		0.935	4	-
			TDS	SDS	Brochure
Description EL-Lene™ M3504DXP and M50 are powder and color compound of Dowlex NG2429.01G which is a linear-low density polyethylene octene copolymer for rotational molding applications. M50 are specifically designed for applications requiring excellent environmental stress crack resistance and impact strength combined with low warpage and good processing. It is fully heat and UV stabilized resulting in a wide processing latitude, good color retention, and long life expectancy. Both of them are recommended for large and thick tanks with a generous radius and curve. Related Finished Products Intermediate bulk containers, Drums for chemicals, Boats, Freezer containers, Large and thick tanks with a radius and curve Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 25 Density (g/cm3) ASTM D 1505 0.935 Flexural Modulus (Mpa) ASTM D 790 640 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 4 VICAT Softening Temperature (°C) ASTM D 1525 118
	M90		0.939	3.2	-
			TDS	SDS	Brochure
Description EL-Lene™ M9001RW and Marvel™ M90 are linear-low density polyethylene (LLDPE) for rotational molding applications. M9001RW is a natural color available in a pellet and powder form, whereas M90 is the color compound version. These grades are suitable for rotational molding of large water tanks and parts that require high stiffness. Related Finished Products Large tanks (5,000-22,500 liters), Agricultural storage tanks, Material handling containers, Kayaks, Manholes, Thick wall parts (10 mm and above) Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 29 Density (g/cm3) ASTM D 1505 0.939 Flexural Modulus (Mpa) ASTM D 790 740 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 3.2 VICAT Softening Temperature (°C) ASTM D 1525 117
	M9001RW		0.939	3.2	-
			TDS	SDS	Brochure
Description EL-Lene™ M9001RW and Marvel™ M90 are linear-low density polyethylene (LLDPE) for rotational molding applications. M9001RW is a natural color available in a pellet and powder form, whereas M90 is the color compound version. These grades are suitable for rotational molding of large water tanks and parts that require high stiffness. Related Finished Products Large tanks (5,000-22,500 liters), Agricultural storage tanks, Material handling containers, Kayaks, Manholes, Thick wall parts (10 mm and above) Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 29 Density (g/cm3) ASTM D 1505 0.939 Flexural Modulus (Mpa) ASTM D 790 740 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 3.2 VICAT Softening Temperature (°C) ASTM D 1525 117
	S11		0.938	4	-
			TDS		Brochure
Description S11 is a color compound linear low density polyethylene specifically developed for rotational molding applications. With a balance of stiffness and toughness, a large processing window and a wide variety of color selection, S11 is the recommended material for kayaks, water tanks, playground equipment, and other general rotomolded articles. Related Finished Products Kayaks, water storage tanks (<5000 L), lawn and garden articles, material handling containers, pallets and bins, automotive articles Properties Test Methods Value ARM Impact Strength @ -40 °C, 5.5 mm rotomolded sample (J/mm) ARM Method 27 Density (g/cm3) ASTM D 1505 0.938 Flexural Modulus (Mpa) ASTM D 790 700 Melt Index at 190 °C and 2.16 kg (g/10 min) ASTM D1238 4 VICAT Softening Temperature (°C) ASTM D 1525 116

PP Block Copolymer (1)			Flexural Modulus (kg/cm2)	IZOD 23 °C (kg.cm/cm)	Melt Index at 230 °C and 2.16 kg (g/10 min)
	P640J		12000	10	10
			TDS	SDS	Brochure
Description EL-Pro™ P640J is an impact copolymer polypropylene resin suitable for injection molding process. It provides high stiffness with good processibility. Related Finished Products High impact and durable automotive interior parts; and electrical appliance components such as fan stand, cabinet, spinning tub of wahing machine Properties Test Methods Value Flexural Modulus (kg/cm2) ASTM D 790 12000 IZOD 23 °C (kg.cm/cm) ASTM D 256 10 Melt Index at 230 °C and 2.16 kg (g/10 min) ASTM D1238 10

PP Homopolymer (4)			Flexural Modulus (kg/cm2)	IZOD 23 °C (kg.cm/cm)	Melt Index at 230 °C and 2.16 kg (g/10 min)
	P403J				3.5
			TDS	SDS	Brochure
Description EL-Pro™ P403J is a polypropylene resin which provides good impact resistance and high gloss with ordorless. Food contact is also applicable. Related Finished Products Furniture, fruit basket, household products, toys, office accessories, food container, cap & closure, and infant articles Properties Test Methods Value Flexural Modulus (Mpa) ASTM D 790 13500 Flexural Modulus (kg/cm2) ASTM D 790 IZOD - 4 IZOD 23 °C (kg.cm/cm) ASTM D 256 Melt Index at 230 °C and 2.16 kg (g/10 min) ASTM D1238 3.5
	P700J		14500	3	12
			TDS	SDS	Brochure
Description EL-Pro™ P700J is a homopolymer polypropylene resin, suitable for compounding and injection moulding. It provides high stiffness, gloss, thermal stability and processibility. Also, food contact is applicable. Related Finished Products Electrical appliance compounding mainly for washing machine parts (such as compound outer tub), furniture, fruit basket, household products, toys, office accessories, food container, infant articles Properties Test Methods Value Density (g/cm3) ASTM D 1505 0.9 Flexural Modulus (kg/cm2) ASTM D 790 14500 IZOD 23 °C (kg.cm/cm) ASTM D 256 3 Melt Index at 230 °C and 2.16 kg (g/10 min) ASTM D1238 12
	P701J		-	-	12
			TDS	SDS	Brochure
Description EL-Pro™ P701J is a homopolymer polypropylene resin which provides high processability, ordorless, and good stiffness. Also, food contact is applicable. Related Finished Products Furniture, fruit basket, household products, toys, office accessories, food container, infant articles Properties Test Methods Value Flexural Modulus (Mpa) ASTM D 790 15500 IZOD - 3 Melt Index at 230 °C and 2.16 kg (g/10 min) ASTM D1238 12
	P702J		-	-	12
			TDS	SDS	Brochure
Description EL-Pro™ P702J is a homopolymer polypropylene resin which provides high clarity and gloss, high stiffness, high processability, ordorless, and gloss. Also, Food contact is applicable. Related Finished Products Household products, toys, and containers Properties Test Methods Value Flexural Modulus (Mpa) ASTM D 790 17000 IZOD - 3.5 Melt Index at 230 °C and 2.16 kg (g/10 min) ASTM D1238 12

PP Random Copolymer (3)			Flexural Modulus (kg/cm2)	IZOD 23 °C (kg.cm/cm)	Melt Index at 230 °C and 2.16 kg (g/10 min)
	P750J		12000	7	12
			TDS	SDS	Brochure
Description EL-Pro™ P750J is a random copolymer polypropylene resin, suitable for injection moulding. It provides high clarity, high brightness, high gloss, good stiffness and processibility. Also, food contact is applicable. Related Finished Products Electrical appliance mainly for washing machine parts (such as cover lid and spinner), clear food container, baby bottle ISMB, clear household products, articals requiring high transparency Properties Test Methods Value Density (g/cm3) ASTM D 1505 0.9 Flexural Modulus (kg/cm2) ASTM D 790 12000 IZOD 23 °C (kg.cm/cm) ASTM D 256 7 Melt Index at 230 °C and 2.16 kg (g/10 min) ASTM D1238 12
	P851JO		12500	6.5	20
			TDS	SDS	Brochure
Description EL-Pro™ P851JO is a random copolymer polypropylene resin, suitable for injection moulding. It provides high gloss, transparency and brightness, and good processibility. Also, food contact is applicable. Related Finished Products Electrical appliance mainly for washing machine parts such as cover lid, clear food container, clear large size container, household products, articals requiring high transparency Properties Test Methods Value Density (g/cm3) ASTM D 1505 0.9 Flexural Modulus (kg/cm2) ASTM D 790 12500 IZOD 23 °C (kg.cm/cm) ASTM D 256 6.5 Melt Index at 230 °C and 2.16 kg (g/10 min) ASTM D1238 20
	P852J		12500	5.5	35
			TDS	SDS	Brochure
Description EL-Pro™ P852J is a random copolymer polypropylene resin which provides good processability, good appearance, and good impact strength with stiffness balance. Also, food contact is applicable. Related Finished Products Thin wall article, DVD cases, boxes, clear food and large size containers, household products Properties Test Methods Value Flexural Modulus (kg/cm2) ASTM D 790 12500 IZOD 23 °C (kg.cm/cm) ASTM D 256 5.5 Melt Index at 230 °C and 2.16 kg (g/10 min) ASTM D1238 35

PVC Paste Resin (2)			Brookfield Viscosity at 20 rpm (poise)	K Value	Sever Viscosity at 80 psi (poise)
	PG740		25	74	75
			TDS	SDS	Brochure
Description PG740 is a high molecular weight homopolymer paste PVC resin, produced by Hybrid® Dispersion polymerization process. It has low viscosity, good viscosity stability, good foam quality, excellent air release, high physical strength, good heat stability. Related Finished Products Top layer for synthetic leather, tarpaulin, fabric coating products, PVC flooring products, strand coating products, mesh coating products, conveyor belts, industrial glove, auto sealants, mastic, logo, toys, handles and grips of hand tools, printing ink Properties Test Methods Value Brookfield Viscosity at 20 rpm (poise) ASTM D1824 @ 20 rpm 25 K Value ISO 1628-2 74 Sever Viscosity at 80 psi (poise) In-house method 75
	PG770		25	80	92
			TDS	SDS	Brochure
Description PG770 is a high molecular weight homopolymer paste PVC resin, produced by Hybrid® Dispersion polymerization process. It has low viscosity, good viscosity stability, good air release property, excellent heat stability, very high physical strength. Related Finished Products High strength top skin layer for synthetic leather, high strength tarpaulins, strand coating products, mesh coating products, fabric coating products, metal coating products, disposable glove, industrial glove, auto sealants, logo, flow molding products, toys or rotational molding products, boots or slush molding products, terminal sleeve, printing ink, crown closure, other high physical strength PVC products Properties Test Methods Value Brookfield Viscosity at 20 rpm (poise) ASTM D1824 @ 20 rpm 25 K Value ISO 1628-2 80 Sever Viscosity at 80 psi (poise) In-house method 92