close

GRADE

S15

SCGC™ LLDPE S15 is a special linear-low density polyethylene (LLDPE) designed for strong adhesion to polyurethane foam (PU foam). S15 helps eliminate internal surface modification step since PU foam can be applied directly right after molding and reduce reject rates due to improper internal surface modification, in addition to reducing additional raw material procurement and increasing safety in the work station. It is suitable for temperature insulated applications.

Heat insulation products which have PU foam in the middle layer

Properties	Test Methods	Value
Density (g/cm³)	ASTM D 1505	0.932
Melt Flow Rate at 190 °C and 2.16 kg (g/10 min)	ASTM D 1238	4.00
UV level	ASTMG155	2

RELATED PRODUCT GRADES

SCGC™ LLDPE M30 series are color compound linear-low density polyethylene (LLDPE) for rotational moulding applications. These grades are suitable for containers and general applications which have wall thickness less than 5 mm. M30 Series designed for indoor and semi-indoor products with UV2.

SCGC™ M3204RU is a linear-low density polyethylene (LLDPE) for indoor/ semi-indoor rotational moulding applications. M3204RU is a natural color PE resin available in a pellet and powder form. This grade is suitable for containers and general purpose applications which are indoor/ semi-indoor or for thin wall parts. (Wall thickness less than 5 mm)

SCGC™ LLDPE M40 are color compound linear-low density polyethylene (LLDPE) for rotational molding applications. These grades are suitable for containers and general applications which have wall thickness less than 5 mm. M40 has UV8 protection for outdoor application.

SCGC™ LLDPE M72 is a color compound linear-low density polyethylene (LLDPE) for rotational moulding applications. With a high melt flow and a balance of impact strength and processability, this grade is specifically designed for rotational moulding of cooler boxes, exhibiting an excellent surface finish with no pinholing.

SCGC SOLUTIONS